A few examples of appraisal values for
US MODEL 1860 CAVALRY SABER DATED 1864

• CIVIL WAR MODEL 1860 U. S.
  CIVIL WAR MODEL 1860 U. S. CAVALRY SABER With 34-1/2 in. blade, the ricasso marked US with inspector's initials JCW and 1865 on the right side of the blade; the wooden grip with remnants of leather underneath the brass wire; knuckle bow numbered "100" while the pommel is stamped "VII 91 JH," lacking scabbard.
• MODEL 1860 CAVALRY SABER 34-3/4 in.
  MODEL 1860 CAVALRY SABER 34-3/4 in. blade, the ricasso stamped U.S / J.M /186(2) on the right and EMERSON & SILVER / TRENTON, N.J. on the left, brass guard and pommel, exposed wooden grip; iron scabbard with two suspension rings.
• MODEL 1860 U.S. CAVALRY SABER
  MODEL 1860 U.S. CAVALRY SABER 34-1/2 in. blade, the ricasso stamped U.S / ADK / 1863 on the right and having an illegible maker's mark obscured by corrosion on the left; lacking scabbard.
• MODEL 1860 LIGHT CAVALRY SABREModel
  MODEL 1860 LIGHT CAVALRY SABREModel 1860 Light Cavalry Sabre. 35" blade marked at ricasso "Emerson & Silver", and "U.S. DFM" and dated "1864" on the reverse. Leather and brass wire-wrapped handle, metal scabbard. Condition: : Good with wear, blade has minor mottling, scabbard shows pitting and rust. Condition: Condition: : Good with wear, blade has minor mottling, scabbard shows pitting and rust.
• MODEL 1860 CAVALRY SABER. Marked
  MODEL 1860 CAVALRY SABER. Marked for C. Roby and dated 1865 on the ricasso 34 3/4'' blade brass guard wire-wrapped grip metal scabbard. Plating on the scabbard mostly present bent wires on the grip.
• MODEL 1860 CAVALRY SABER. Unmarked
  MODEL 1860 CAVALRY SABER. Unmarked but probably Ames Manufacturing dated 1862 on the ricasso 34 3/4'' blade brass guard wire-wrapped grip and metal scabbard. Some deterioration to the leather grip corrosion to the scabbard.
• U.S. MODEL 1840 P.S. JUSTICE
  U.S. MODEL 1840 P.S. JUSTICE CAVALRY SABER United StatesBrass hilt, a leather and wire-wrapped wooden grip, steel blade marked on the ricasso "P.S. JUSTICE/PHILADA", with a steel scabbard marked "S&K/D.M." on the drag.
• MODEL 1860 U.S. LIGHT CAVALRY SABER
  MODEL 1860 U.S. LIGHT CAVALRY SABER The ricasso marked EMERSON & SILVER / TRENTON / N.J; 34-3/4 in. blade; brass guard, knuckle bow and pommel; the wooden grip wrapped with brass wire. LLA works in partnership with ARTA to fulfill shipments of most of the items we sell; weaponry is not included. Alternative shipping vendors are available. Please find a courtesy listing of local options on our Support Page.
• MODEL 1840 U.S. CALVARY SABER
  MODEL 1840 U.S. CALVARY SABER WITH SCABBARD 35" blade, from same family as the Spencer Model 1865 Calvary Carbine
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber 33-3/4 in. blade, one side marked "US J.M. 1864", other side marked "F. MF. RS&Silver, Trenton, NJ.", probably original grip and wire, with scabbard, total length 42 in.,
• CAVALARY SABER. Model 1860.
  CAVALARY SABER. Model 1860. Both sides of blade are corroded near the handle. No markings are visible on sides. A numeral ''2'' is visible on the top of the blade about an inch from the hilt. No wire and the leather wrap is not original. Possibly an European import of the period.
• US Model 1860 Non-Regulation
  US Model 1860 Non-Regulation Cavalry Saber late 19th century, 33-3/4 in. blade, one side engraved "US" and "F.J. Heiberger, Washington, DC", other side with "E Pluribus Unum" and eagle, guard with eagle and 13 stars, original grip and wire, and part of original hanger, scabbard with brass bands with leaves and berries, total length 40-1/2 in.,
• CHRISTOPHER ROBY MODEL 1860 CAVALRY
  CHRISTOPHER ROBY MODEL 1860 CAVALRY SABER The ricasso marked "U. S. / 1865 / A.G.M." on the right and C. ROBY / CHELMSFORD / MASS", 34-1/2 in. curved blade, brass guard and pommel, wooden grip with twisted wire wrap; iron scabbard with two suspension rings.
• Model 1840 U.S. Cavalry Saber Civil
  Model 1840 U.S. Cavalry Saber Civil War era, openwork brass guard, blade marked at rocasso "Sheble & Fisher" over "PH LAD", 41 in. excluding scabbard,
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber unmarked blade, openwork guard, original grip and wire, mellow old patinated surface, 33 in. blade; metal scabbard, 40-3/4 in. total length,
• Model 1860 US Cavalry Saber blade
  Model 1860 US Cavalry Saber blade faintly marked "US J…186…", right side worn, stamped on guard "21 CT" and "14", probably Mansfield Lamb, Connecticut, 21st Regiment, 35 in. blade; metal scabbard, 42-1/4 in. total length,
• CHRISTOPHER ROBY MODEL 1860 CAVALRY
  CHRISTOPHER ROBY MODEL 1860 CAVALRY SABER The ricasso marked "U. S. / 1864 / A.G.M." on the right and C. ROBY / CHELMSFORD / MASS", 34-1/2 in. curved blade, brass guard and pommel, wooden grip with twisted wire wrap; iron scabbard with two suspension rings.
• CIVIL WAR ERA CAVALRY SABER.
  CIVIL WAR ERA CAVALRY SABER. American mid 19th century. Model 1840 with blade marked ''Tiffany & Co. New York'' and ''PDL'' (supplier of Soligen blade). Iron guard worn leather grip. Iron scabbard. 43''l.
• US Model 1840 Cavalry Saber
  US Model 1840 Cavalry Saber 35-1/2 in. blade marked "Horstmann's Phila", with scabbard, total length 42-1/2 in.,
• Two Civil War-Era Cavalry Sabers
  Two Civil War-Era Cavalry Sabers American, 19th century, one with 35 in. blade marked on one side \"US 1864\", other side marked \"Roby/W. Chelmsford/Mass\", brass guard, with scabbard, wooden grip with loss
• UNMARKED MODEL 1840 CAVALRY SABER
  UNMARKED MODEL 1840 CAVALRY SABER Mid-19th century, 35 in. curved blade; brass guard; wooden grip wrapped in old black tape; the iron scabbard with two suspension rings.
• U.S. Cavalry Officer's Model 1872
  U.S. Cavalry Officer's Model 1872 Saber 34'' blade with etched panels of military motifs. In a panel near the ricasso is etched in four lines Springfield Armory Springfield Mass. U.S.A. This style of marking was used circa 1892-1900. Shagren and gilt brass wire wrapped handle. Metal scabbard. Condition: Sword is excellent. The scabbard has a brown patina speckled with some nickel finish.
• US Model 1860 Non-Regulation
  US Model 1860 Non-Regulation Cavalry Saber late 19th century, 33-3/4 in. blade, one side engraved "US" and "Ridabock & Co. New York", other side with "E Pluribus Unum" and eagle, guard with eagle and 13 stars, original grip and wire, scabbard with cast brass bands with leaves and berries, total length 40-1/2 in.,
• 2 ''PATTON'' MODEL 1913 U.S.
  2 ''PATTON'' MODEL 1913 U.S. CAVALRY SABRES: 43'' l., with metal and fabric scabbard. One sword is marked 20320, and dated 1914. The other is dated 1918. CONDITION: Scabbards have wear, rust, blades show some minor rust, pitting and discoloration. Sold as is
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber unmarked blade, openwork brass guard, original grip and wire, 32-3/4 in. blade; metal scabbard, 40-1/4 in. total length,
• CAVALRY SABER. American
  CAVALRY SABER. American ca.1810. Dragoon saber with blueing and gilt engraved designs on the blade. Steel guard and leather wrapped handle. Marked ''A. W. Spies''. Wear. 37''l.
• U.S. 1860 CAVALRY SABER AND
  U.S. 1860 CAVALRY SABER AND SCABBARDA nice 1860 cavalry saber by Emerson & Silver of Trenton, New Jersey, dated 1864. The grip is excellent, and the blade is quite nice, although it has a single nick in the cutting edge. The scabbard is complete, but is in relic condition. The number 54 is stamped on the guard. Dimensions: the blade is 34.75 inches long and the sword is 42 inches long overall. Processing and shipping within the continental U.S. $55.00 plus 1.5% replacement cost insurance. Condition: The saber is extremely nice, other than a single nick in the cutting edge. The maker’s name and inspectors’ stamp are somewhat worn, but still clear. The grip is excellent, with all its original leather and wire, and there is a crack in the grip leather on the reverse side. There is some verdigris on the knuckle bow. Witherell's strives to provide as much information and photographs as possible but encourages in-person inspection by bidders. Condition: statements are only for general guidance and should not be relied upon as complete statements of fact and do not constitute a representation, warranty or assumption of liability by Witherell's. All lots are sold "AS IS" under terms and conditions.
• Model 1860 Cavalry Saber by Roby
  Model 1860 Cavalry Saber by Roby 34.5" blade. Marked at the ricasso C. Roby;?reverse dated 1865.? Leather and brass wire wrapped handle.? Brass pommel and knuckle bow.? Metal scabbard. Condition: Excellent.
• M1860 LIGHT CAVALRY SABER, CIVIL
  M1860 LIGHT CAVALRY SABER, CIVIL WARLight cavalry saber, unmarked blade. Believed to be made by Henry Sauerbier of Newark, N.J. (many of his swords were unsigned). Measures 43" overall in scabbard. See images. Some leather wear on grip. Fine blade edge, with one single edge bite. Gold painted scabbard. This item can be shipped in-house.
• PAIR OF US CAVALRY MODEL 1906
  PAIR OF US CAVALRY MODEL 1906 SABERSPair of US Cavalry model 1906 sabers, manufacturer's mark "A.S. Co", "1906" and "U.S." on blades, wire wrapped shagreen grips. Overall length appx 38"l. Good condition.
• AMES MODEL 1840 CAVALRY SABER
  AMES MODEL 1840 CAVALRY SABER 35-3/4 in. blade, the ricasso stamped US / S.K on the right and N. P. AMES / CABOTVILLE / 1847 on the left, brass guard and pommel, leather retaining two strands of wire over wooden grip; iron scabbard with two suspension rings.
• Model 1840 U.S. Cavalry Saber
  Model 1840 U.S. Cavalry Saber 35-3/4 in. blade marked "PDL" in oval cartouche (mark for Tiffany & Co., mid 19th century), brass guard, original grip, wire and scabbard,
• EMERSON AND SILVER M1860 US CAVALRY
  EMERSON AND SILVER M1860 US CAVALRY SABRE Emerson and Silver, Trenton NJ made Model 1860 US Cavalry sword and scabbard, the sabre having a plain brass pommel and guard, leather grip held on by 11 twists of brass wire, blade marked 'US', 'JM', and 1865 on one side and on other side is the manufacturer's mark, as well as stamps of 'G79' on knuckle guard,' M' and 'JM' on pommel cap, the standard steel scabbard with two rings and accompanied by a period leather and brass belt hook assembly, the leather is stamped 'bb58' and '74', Approximate measurements: blade l. 34. 75 ". overall l. 41" in scabbard l. 42"
• US 1860 LIGHT CAVALRY SABER REPLICA
  US 1860 LIGHT CAVALRY SABER REPLICA W/ SCABBARD A nicely made replica of the Model 1860 Light Cavalry Saber used by Union forces during the Civil War. The sword features a 36" curved blade mounted to a bronze wrap-around hand-guard hilt and wire-wrapped leather grip. The sword has only one marking of a Knight's Helmet on the right hand side just above the hilt. The scabbard appears as if it could be a genuine Civil-War era piece, however, as it has the distinctive solder line along the blade edge. The sword is in overall good condition with some minor damage to the leather grip and light rust spots near the base, the scabbard has surface rust throughout.
• TWO CAVALRY SABERS A U.S. Model
  TWO CAVALRY SABERS A U.S. Model 1860 Light Cavalry Saber made by Lamb with a brass hilt (bent quillon and missing wire wrap); and an imported K&C Solingen Model 1840 Cavalry Saber.
• AMES MEXICAN WAR ERA MODEL 1840
  AMES MEXICAN WAR ERA MODEL 1840 CAVALRY SABER 36 in. curved blade, the ricasso stamped "CABOTVIILLE / 184--" on the right and "U - / - WR" on the left, the brass pommel stamped by inspector "J. W. R.' (James Wolfe Ripley, 1843-1855), brass guard over wooden grip wrapped in leather secured by brass wire; iron scabbard with two suspension loops.